ST Table Assembly
Place the right side element on flat, even surface, and put an ample bead of glue in the groove. Insert a football-shaped biscuit into the groove.
Take the tabletop element. Use the tool to turn screws on the tabletop element two rotations so the screw tips stick out ~1/8 inch. Put an ample bead of glue into the tabletop element grove.
Important: Align the two screw tips of tabletop element with the two holes of the right side element.
Tighten the two screws two turns at a time, alternating between screws until they are very snug, enclosing the biscuit between the grooves. Note: if either screw does not screw in easily, do not force—the screw may be misaligned and the tips must be realigned.
Wipe off any excess glue with a wet paper towel. Lay left side element on a flat surface. Add glue to the seam of the left side element. Attach the left side element in the same manner to assemble the table. All joints should be snug and tight, without wobbles.
Wipe off any excess dripping glue with a wet paper towel. Stand side table up and allow glue to dry for 6-12 hours.
All joints should be snug and tight, without wobbles.
Stand chair up and wipe off any excess dripping glue with a wet paper towel.
Allow to dry overnight.